Motorcycle-tech injection usually equipped with an indicator light on the speedometer panel. Lamp called MIL (malfunction Indicator Light) serves as a notifier condition of the engine, especially the sensors on the motorcycle.
To know the damage that occurs, you can perform calculations on the amount of flicker that appears. Honda itself has a standard code in the form of the amount of flicker MIL.
"Kedipannya consists of units and tens. For flashing light units between 0.3 or 0.4 seconds. While dozens characterized by a longer blink. The amount of this flicker will be forming a code that represents the damage," said Supreme Sugihono, Training Facilitator PT Power Adicipta Mustika. So what are the codes that damage, consider the following.
1 blink
This code ensures your motorcycle is damaged in Manifold Absolute Pressure (MAP) which detects the level of vacuum in the intake manifold.
7 wink
If this code appears, Engine Oil Temperature temperatura or Engine coolent impaired. This disorder causes the combustion system can not work optimally which impact on fuel wastage.
8 wink
This code indicates the disruption of the Throttle Position sensor. Damage to the sensor causes wastage of fuel and difficult starter.
9 wink
Intake Air Temperature certainly you experience interference. IAT own works by detecting the temperature of the air that passes through the throttle body, then change the temperature into electrical signals that are sent to the ECU. With the IAT sensor, the amount of fuel injected will always be at an optimal level.
12 blink
This code indicates Injector motorcycle you are having problems. This disorder usually causes the motor can not be started.
21 blink
Impaired O2 sensor will be projected through this code. The sensor itself is functioning to detect the exhaust gas against toxic gases and engine combustion conditions.
29 blink
Idle Air Control Valve is a component that helps in the ignition. If this code appears, you IACV certainly impaired.
33 blink
If you run this code, be sure your bike will not be menayala. Because of this code indicates that an interruption in the ECM (Engine Control Module) which is the brain of the entire injection system settings.
54 blink
This code indicates damage to the Bank Angle sensor. These sensors work cut power when the engine is having a slope of up to 60 degrees.
